Raggy Halloween Trick or Treat Candy Bag

Raggy Halloween treat bag! This cute little bag will be perfect for your little ghost or goblin! I've embroidered a skull on one side and a bat on the other. My own kids carry similar bags and have for many years so it will last for years to come!
Check this and other items out at BCA INSPIRATIONS

Raggy Halloween Trick or Treat Candy Bag

Raggy Halloween treat bag! This cute little bag will be perfect for your little ghost or goblin! I've embroidered a cat on one side and a pumpkin on the other. My own kids carry similar bags and have for many years so it will last for years to come!
Check this and other items out at BCA INSPIRATIONS

Raggy Halloween Trick or Treat Candy Bag

Raggy Halloween treat bag! This cute little bag will be perfect for your little ghost or goblin! I've embroidered a ghost on one side and a witch on the other. My own kids carry similar bags and have for many years so it will last for years to come!  
Check this and other items out at BCA INSPIRATIONS

Diamond Patterned Baby Girl Rag Quilt

This is a cute diamond patterned baby girl rag quilt. I stitched each quilt block in the diamond pattern, then I layered it in the traditional rag quilt way. Top layer is made of different types and prints of cotton. The middle and bottom layers are made of the same striped flannel. Soft and very warm! Washed once to start the ragging process.

Be sure to check out my shop for more "raggy" items!  BCA INSPIRATIONS

Large Pink Baby Girl Rag Quilt

This quilt is perfect for the new baby girl in your life. It measures 53"L x 42"W. Perfect size for cribs, bassinets, or just tossing over the carseat. It was made with a 2 layers of cotton sandwiching a layer of flannel in the middle to make it warm but not to bulky. The top layer has solid pink and a lighter pink with flowers. Bottom layer is purple with dots.

Easy care...just toss it in the wash and go! When drying I do clean out my lint filter about half way through the drying cycle, because it will be full, atleast for the first few washings.

I have been making these quilts for about 10 years now. I use them in my home and have also given them to friends and family, that's how much I love them! 

Smoke free enviroment!


See it and others here.  BCA INSPIRATIONS

Baby Girl Rag Quilt with embroidery designs

This beautiful rag quilt is going to make some little girl very happy. Made completely from pastel colored flannel. Yes all 3 layers. I chose to go with flannel all the way because as a new Mom you have enough to carry, why add a "bulky" blanket to the load. Each square is 12" and I've added an embroidery design to every one. It has been washed once to start the ragging process. With each additional washing it will get more beautiful. Wash in cold water and tumble dry on low. Make sure you clean out your lint filter often for the first couple of washes.

Smoke free enviroment!!
Be sure to check out shop for other items!  BCA INSPIRATIONS

baby pinwheel rag quilt

This listing is for a baby rag quilt stitched in the pinwheel design. It measures 38" x 38". Perfect size for taking in the stroller or carseat. There's a layer of flannel in the middle for warmth without being to bulky. 

Smoke free enviroment!!
Be sure to check out my shop for other rag quilt items!  BCA INSPIRATIONS

Twin Size Checker Flannel Rag Quilt with Matching Pilow

This is a twin size flannel rag quilt made with checkered flannel squares in pink, white, purple, and green. The green and pink checkered material was used on the back. Three layers of each square are stitched with the traditional X. I then turned all seems out and clipped each on to give it the "raggy" effect. It measures 55 1/2 " across and 79" long. Just in time for winter, this is a heavy quilt and would be perfect on your little ones bed. Washed and dried once to start the ragging process. This quilt is ready to go! No long wait times on this beauty!! The matching pillow measures 16 1/2 X 16 1/2.

Be sure to check out my shop for other rag quilts!!  BCA INSPIRATIONS

Steampunk Vintage Cameo and Filigree Pendant Necklace

This vintage cameo is attached to filigree. The filigree is then attached to 2 old grandfather clock gears and they are attached round pendant. The entire pendant is approx. 2" x 2". The layering effect gives the pendant depth and highlights the coloring on the cameo nicely. It hangs on a 22" antique brass ball chain. 

Steampunk inspired look straight out of my mothers jewelry box. Thanks for looking and be sure to check out my shop for other Steampunk inspired items.  BCA INSPIRATIONS

Steampunk Necklace Heart Pendant with Gear, Dragonfly and Feathers

Heart pendant with an antique colored grandfather clock gear and dragonfly charm attached. I've also added 2 silver colored feathers to the bottom for a little swinging effect. Simple yet elegant and will complement any outfit. From the top of the pendant to the bottom of the feathers measures a little over 3". It measures approx. 1 1/2" across. It is attached to a silver colored ball chain with a split ring for added security. The entire necklace hangs approx. 14" down.
Check out my shop here.  BCA INSPIRATIONS

Steampunk "Time in a Bottle" Pendant Necklace

Very cute little necklace! I simply took old watch parts and put them into a small glass bottle with cork. The cork is glued to keep in from spilling over. I then added a silver chain with a toggle closure. It measures approx. 18" from end to end. Very simple and elegant!

Be sure to check out my shop!  BCA INSPIRATIONS

Steampunk Watch Face Watch Movement With Wings Pendant Necklace

This is a Steampunk pendant necklace. The watch face has an old grandfather clock gear attached to it and then a 17 Jewels watch movementattached to the top of the gear. Finally, I've attached wings to the back. The necklace measures approx. 13" in length. The pendant measures 3" from the tip of both wings. Antique colored chain and lobster clasp completes this necklace. 

Thanks for looking and be sure to check out my shop for other Steampunk items.  BCA INSPIRATIONS

Steampunk Watch Movement with Grandfather Clock gear and Swarovski Gems Pendant Necklace

Steampunk watch movement and grandfather clock gear pendant! I've taken a 1 jewel watch movement and attached it to an old grandfather clock gear. I then took the gear and attached it to a pocket watch casing back with resin. A pink Swarovski Hotfix gem was attached to the front of the movement to give a little more color. When the pendant was complete, I then attached it to an antique brass colored ball chain. The necklace and pendant hang approx. 13". 

♥♥♥Thanks for looking and be sure to check out my other Steampunk items.♥♥♥  BCA INSPIRATIONS

Steampunk Inspired Wing Pendant Necklace with Resin and Watch Parts filled Bezel and Swarovski Gems

This is a Steampunk inspired beauty. The pendant is a large wing with a bezel filled with watch parts and resin. While preparing the resin, i added a liitle glitter to give it a "grainy" look. The watch parts and the glitter resin give it a suspended ti time look to it. I then added Swarovski gems in shades of blue to add a little color to the piece. Three sections of chain complete the necklace. The necklace and pendant hang approx. 15". 

Thanks for looking and be sure to check out my shop for other Steampunk items!  BCA INSPIRATIONS

Steampunk Watch Face Pendant Necklace with Gears

This is a Steampunk watch face necklace. The pendant is a watch face with gears and a Crystazzi gem attached. The necklace hangs approx. 16 1/4 in. Scrapbook tape with the word "Artful" was singed and attached in the center. The chain comes from an old Regula Cuckoo clock. The gears show a little wear due to the fact that they were removed the same clock. It simply adds to the charm of the entire peice. An antique brass colored lobster clasp completes the necklace. 

Check out my shop for other Steampunk creations.  BCA INSPIRATIONS

Steampunk Gear with Butterfly Pendant Necklace

This is a Steampunk inspired necklace with 3 gears and a butterfly attached pendant. Everything was taken from an old Colonial Grandfather clock except the butterfly, the large decorative toggle clasp and jump rings. Yes, even the chain was recycled from the Grandfather clock. This was a fun piece to create and will be equally fun to wear!! 

Check out my shop for other creations!!  BCA INSPIRATIONS

Steampunk Watch Movement and Gear Pendant Necklace

Watch movement and gear pendant necklace designed with a Steampunk look to it. The gear comes from a Colonial Grandfather Clock. A Clinton Watch Co. 17 Jewels watch movement is attched to the gear with E6000. The pendant is connected to an antique copper colored wire wrapped bead with a jump ring and then the bead is connected to an antique brass colored ball chain using another jump ring. Very elegant!! The entire necklace hangs approx. 13". 

Be sure to check out my shop for other Steampunk inspired items.  BCA INSPIRATIONS

Steampunk Octopus and Double Gear Pendant Necklace

This is a Steampunk Octopus and double gear necklace. The gears come from an old grandfather clock. A steampunk octopus rests on top of the gears. It hangs from an antique brass chain that comes from an old regula cuckoo clock. The latch comes from the same clock. The necklace and pendant hang approx. 15". 

This is a nice addition to any Steampunk collection! Thanks for looking and check out my shop for other Steampunk items!  BCA INSPIRATIONS

Steampunk Pendant Necklace Gear Wrapped with Butterfly Filigree and Small Cameo

Steampunk gear wrapped with butterfly filigree and has a small rose cameo centered on it. Antique brass connectors attach this beauty to antique brass colored chain. Three small sections of chain dangle from the bottom. The gear measures approx. 1 3/4 in across. Simple and classy!! 



Be sure to check out my shop for other Steampunk inspired items.  BCA INSPIRATIONS

Steampunk Necklace Vintage Pocket Watch with Skull Charm and Vintage Watch parts in Resin

This is a Steampunk necklace made with a vintage pocket watch bezel. I've set the vintage watch parts in resin and then attached the pendant to a black satin ribbon. I've also left a section of chain to allow for a small amount of adjustment. The entire piece hangs approx. 11". Keep in mind that this is a vintage watch bezel so it does have scratches and some dents. This only adds to the beauty and charm of the piece! 

Perfect for the avid Steampunk collector. I really love how this pendant turned out and I hope you so too!!


Check it out at BCA INSPIRATIONS

Steampunk Necklace Vintage Watch Movement with Gears and Rose Connectors

Steampunk vintage watch movement necklace. The movement is from the New York Standard Watch Co. I've added 3 Swarovski gems to the movement itself. I added rose connectors and small grandfather clock gears, and then attached it to an antique brass colored chain from an old cuckoo clock. The entire necklace hangs approx. 10". 

Be sure to check out my shop for other Steampunk creations!  BCA INSPIRATIONS

Steampunk Necklace Octopus set Resin in a Vintage Pocket Watch Bezel with Grandfather Clock Gears

Steampunk!! This vintage pocket watch has never looked better!! This is a Steampunk necklace with the traditional Steampunk octopus set in resin inside. I've left just enough of the octopus out of the resin to give it a textured feel to it and to allow the room for the watch bezel to still open. I've then attached the pendant to 4 small sections of chain which are attached to 2 grandfather clock gears. I've finished the necklace with more of the same chain. 

Be sure to check out my shop for more steampunk creations at BCA INSPIRATIONS